 |
CSA SERIES
Edge-to-Edge Chip Capacitors
This classic two-electrode design is the simplest and most widely used. The chip size, shape and electrical properties may be determined and specified from the dielectric material data and the CSA Selection Chart.
|
 |
RPS
Rapid Prototyping System
For Thin Film Substrates and Copper Laminate Boards. Single prototype to full production.
|
|
|
 |
CSM SERIES
Margin Capacitors
Margin caps have the topside electrode withdrawn from the edges in order to increase the distance between electrodes and dramatically decrease the possibilities of shorting when epoxy die-mounting.
|
 |
MST SERIES
Alumina Mounting Shorts
Alumina mounting shorts, with metallization on the top, bottom, and two of four sides, allow placement of a wirebond anywhere in the circuit, replacing the need for gold terminations on the substrate. They also can be used to raise the ground plane, reducing lead length for reduced inductance.
|
|
|
 |
SBMT SERIES
Submounts
Submount materials include quartz, alumina, aluminum nitride, kovar and beryllium oxide. Applications include heat sinks, standoffs, height matching, bonding pads and jumpers. Custom sizes and patterns available to your design specifications in thicknesses from 3 to 60 mils and beyond.
|
 |
CSB SERIES
Dual-Pad Chip Capacitors
A single full electrode is provided on one side of the capacitor and split electrodes on the other side. This is a three-terminal capacitor which can be used as two capacitors with a common electrode or as serially connected capacitors so that connections may be made on one side of the chip only (surface-mount).
|
|
|
 |
CRO/CRM SERIES
Row Capacitors
Row Capacitors are used where arrays of capacitors (not necessarily identical) are needed, usually for decoupling/ bypass of GaAs integrated circuits. Values up to 1000pF per capacitor and up to 8 capacitors per array are available.
|
 |
CSX SERIES
Multiple-Value Custom Capacitors
A common electrode on one side of the chip and multiple custom electrodes on the other side. The capacitor array can be used as individual capacitors on a single chip or as a step-adjustable capacitor by connecting combinations of electrodes to achieve the desired capacitance.
|
|
|
 |
CAD SERIES
Step-Adjustable Binary Array Capacitors
The arrays of capacitors are arranged in binary ratios (1-2-4, 1-2-4-8, and 1-2-4-8-16) to allow adjustment of capacitance from 1 to 31 units by connecting appropriate electrodes in parallel. Additional values of capacitance can be obtained by using series and/or parallel connections.
|
|
|
Download our catalog as
an Adobe PDF file:
|
Download free Adobe
PDF Reader:
|
 |
 |
|
